How to select a Laboratory Fume Hood

Powered by Godrej Interio :

There are three key aspects to be considered while selecting a Fume Hood:

  1. Size of the room where the Fume Hood is to be installed: Length x Width x Height

  2. Expected usage of Fume Hood:

  • 3’ & 4’ width Fume Hoods are intended for 1 person with relatively small apparatus

  • 5’ hoods are for 1 or 2 people, or with large apparatus

  • 6’ hoods are generally for 2 or more people, or with exceptionally large apparatus

3. Application of Fume Hood:

  • A normal Auto-bypass Fume Hood can be used for general purpose applications like

  • teaching and for non-AC research laboratories involving use of acids and organic solvents

  • For handling Perchloric Acid and Hydrofluoric Acid, highly toxic and other unstable explosive materials and radio-isotope applications, special design hoods are required

  • Under-storages should be chosen as per the storage requirement (for apparatus or for

  • corrosive acids or for flammable solvents)

  • LCV Fume Hood should be used for AC labs

INSTALL CLUSTERED FUME HOODS FOR QUICKER, MORE EFFICIENT SET UP


When multiple fume hoods are present in the lab, they can be clustered together to be connected to a common exhaust system. The entire cluster can be operated simultaneously, reducing investment and time required for designing and building of exhaust comprising of ducts and blowers.


Request Quote | Best Offer


Category :


Our Fume Hood is available in Bench Top variant with efficient functioning and user friendly parameters as shown below.


VARIANTS BY WIDTH

  • 4' width

  • 5' width

  • 6' width


VARIANTS BY AIRFLOW

  • CONSTANT AIR VOLUME

  • AUTO BYPASS (ABP)

  • LOW CONSTANT VOLUME (LCV)

COMPLETE FUME HOOD SOLUTIONS WITH EXHAUST SYSTEMS INSTALLED ON SITE


Blowers

Godrej Interio offers high quality blowers, which when connected to fume hoods via ducting complete the exhaust system in making the Fume Hood functional. You can choose from:

  • High-quality reputed indigenous blowers made from PP + FRP casing and FRP-vinyl ester Impellers

  • Imported fully PP Moulded blowers.

Scrubbers

Scrubbers are installed as a part of the exhaust system to scrub the incoming gases exhausted from Fume Hood. The cleaner scrubbed gas is released to the environment. Based on the application, the scrubber type can be a wet or a dry one.


Godrej Interio FumeHood : https://www.designelegance.in/post/aeolus-neu-laboratory-fume-hood-godrej-interio



Request Quote | Best Offer