Godrej Interio is delighted to introduce Cypress Bedroom Furniture range which is a Theme-based Bedroom Furniture Range for people who have a special place in their hearts for Mountains and Nature!
Cypress Bedroom Furniture Range consists of :
Cypress King and Queen Bed
Cypress Chest of Drawers
Cypress BedSide Table
Cypress Foldabe Study Table
Cypress Dresser Unit with Stool
Cypress Woldorf Wardrobe
Cypress Immensa Hydraulic Kit
Mountains Themed Bedroom Set
Purely inspired by the Mountains which symbolize Eternity, Stillness, Peace and Grandeur
FEATURES
Choice for the customers in terms of the type of storage – either Full Hydraulic Lift up or Motorised mechanism
THEMES inspire a strong connect between people and happiness. They take people to happy places where they can feel the comfort and solace, and foster happy memories
Premium Sliding Door Wardrobe Platform with more drawers, and inbuilt lockers, soft closing features, individual locks
The Body and Doors can be offered in various colours and finishes like Kalista but in Sliding Door Platform
The Cypress Bedroom range is designed to cater to the refined aesthetics of urban homes, with the promise of Godrej quality and durability.
Cypress is a specially crafted portfolio of products that is inspired by the mighty, majestic & magnificent Mountains. This motif generates the feelings of peace, outdoors & nature.
With it's modern approach, the masterfully adapted design creates a strong and bold symbolism that perfectly embodies & exemplifies calmness, bliss, harmony and serenity.
King Bed
Overall Size:
Length(L) — 2176.0 mm
Width (W) — 1899.0 mm
Height (H) — 1185.0 mm (Height of Mattress panel from floor: 416 mm; Clearance from floor: 13 mm)
Material:
The Bed structure consists of metal frames made of M.S. ERW tube 25x25x1.2 mm square & MS CRCA sheet metal in 1.6, 2 & 3 mm thickness. The linkages for Mattress frame lifting are made of 5.0 mm thick HR steel.
The mattress frame is made of MS tube of 50x25x1.2 thick and 19x19x1.2 thick. and corner plastic connectors. The complete frame is fixed with 9mm Prelaminated Particle Board for support of mattress.
All the metal components are Powder coated with Epoxy polyester powder to the thickness of 50 microns (±10).
The bed Side board, Lower Headboard, Headboard back support and Under Storage bottom panels are made of 18 mm Thick Prelaminated Particle Board, with all the edges edge banded with 0.8 mm thick PVC lipping.
The headboard side panels are made of 18mm PVC Foiled MDF. While the front panels are 18 and 25 mm PVC Foiled MDF. The foot board is made 18mm PVC Foiled MDF.For accessing the under storage in Motorized storage, an electro—mechanical actuator based lifting mechanism is used for which the control remote is provided. The remote with cable can be removed from the bed base.
Electrical input: 240V AC, 6A
Power cable with 3 pin plug provided
Actuator Duty Cycle: 10%
Actuator voltage: 24 VDC
The High quality LED lights with Rated output power 14.4 W/M, Voltage 24VDC. LED driver with Input Voltage 220-240 VAC/50 Hz, input BIS Certified. Output Overload &output overvoltage protection are inbuilt. High quality hardware like Cam fasteners, metal insert, maxi connectors, screws & dowels are used.
The maximum allowable mattress weight is 60 kg for motorized configuration.
In our full hydraulic beds we can suggest users to use heavier mattresses as per their preference and convenience. However, the customers may be able to use the mechanism till weight of 36 Kgs beyond which the mechanism will certainly need the support of the stopper provided in the bed.
We also recommend that the stopper mechanism be always used for lightest to heaviest mattresses for users’ safety
The Motorized bed-bases are a natural extension to the hydraulic design to provide the users with convenience to access the storage effortlessly
Construction: Knock Down construction.
Packets: 1 Bed in 4 packets + 1 packet of actuator kit.
Queen Bed
Overall Size:
Length(L) — 2176.0 mm
Width (W) — 1599.0 mm
Height (H) — 1185.0 mm (Height of Mattress panel from floor: 416 mm; Clearance from floor: 13 mm)
Material:
The Bed structure consists of metal frames made of M.S. ERW tube 25x25x1.2 mm square & MS CRCA sheet metal in 1.6, 2 & 3 mm thickness. The linkages for Mattress frame lifting are made of 5.0 mm thick HR steel.
The mattress frame is made of MS tube of 50x25x1.2 thick and 19x19x1.2 thick. and corner plastic connectors. The complete frame is fixed with 9mm Prelaminated Particle Board for support of mattress.
All the metal components are Powder coated with Epoxy polyester powder to the thickness of 50 microns (±10).
The bed Side board, Lower Headboard, Headboard back support and Under Storage bottom panels are made of 18 mm Thick Prelaminated Particle Board, with all the edges edge banded with 0.8 mm thick PVC lipping.
The headboard side panels are made of 18mm PVC Foiled MDF. While the front panels are 18 and 25 mm PVC Foiled MDF. The foot board is made 18mm PVC Foiled MDF.For accessing the under storage in Motorized storage, an electro—mechanical actuator based lifting mechanism is used for which the control remote is provided. The remote with cable can be removed from the bed base.
Electrical input: 240V AC, 6A
Power cable with 3 pin plug provided
Actuator Duty Cycle: 10%
Actuator voltage: 24 VDC
The High quality LED lights with Rated output power 14.4 W/M, Voltage 24VDC. LED driver with Input Voltage 220-240 VAC/50 Hz, input BIS Certified. Output Overload &output overvoltage protection are inbuilt. High quality hardware like Cam fasteners, metal insert, maxi connectors, screws & dowels are used.
The maximum allowable mattress weight is 60 kg.
In our full hydraulic beds we can suggest users to use heavier mattresses as per their preference and convenience. However, the customers may be able to use the mechanism till weight of 36 Kgs beyond which the mechanism will certainly need the support of the stopper provided in the bed.
We also recommend that the stopper mechanism be always used for lightest to heaviest mattresses for users’ safety
The Motorized bed-bases are a natural extension to the hydraulic design to provide the users with convenience to access the storage effortlessly
Construction: Knock Down construction.
Packets: 1 Bed in 4 packets + 1 packet of actuator kit.
Dresser Unit
Dresser Size:
Length(L) — 600.0 mm
Width (W) — 900.0 mm
Height (H) — 1970.0 mm (without bottom bush)
Pouf Size:
Length(L) — 475.0 mm
Width (W) — 350.0 mm
Height (H) — 415.0 mm
Material:
All the carcass panels of dresser unit are made of 18 mm Thick Prelaminated Particle Board with all the edges edge banded with 0.8 mm thick PVC lipping.
Drawer bottom panels are made of 9 mm Thick Prelaminated Particle Board and are fixed in the grooves. Drawer fronts are made of 18 mm thick PVC Foiled MDF.
The Mirror door is made 18 mm Thick Prelaminated Particle Board with 4 mm thick mirror is fixed to it with the 3M tape. Shelves are provided behind the Mirror with Gallery Fitting. Two Bangle Rods are also provided behind the mirror door.
Pouf is made of 12 mm Ply structure. and provided with the Bottom skirting of Prelaminated particle board with edge Banding. The 28 density 25 mm thick foam is provided all around the ply structure. A foam of 28 density 75 mm thick is provided for the seat. The complete pouf is upholstered with the Leatherette.
High quality hardware like Cam fasteners. hinges. Drawer slides, handle/ knobs. screws & dowels are used.
Construction: Knock Down construction.
Packets: 1 Dresser in 3 packets.
Bedside Table
Table Size:
Length(L) — 454.0 mm
Width (W) — 452.0 mm
Height (H) — 503.5 mm (without bottom bush)
Material:
All the carcass panels for the side table unit are made of 18 mm Thick Prelaminated Particle Board, with all the edges edge banded with 0.8 mm thick PVC lipping. Drawer bottom and back panels are made of 9 mm Thick Prelaminated Particle Board and are fixed in the grooves.
Drawer fronts are made of 18 mm thick PVC Foiled MDF
High quality hardware like Cam fasteners, hinges, Drawer roller slides, handle/knobs, screws & dowels are used.
Construction: Knock Down construction.
Packets: 1 Side table in 1 packet.
Chest of Drawer
Overall Size:
Length(L) — 455.0 mm
Width (W) — 800.0 mm
Height (H) — 1126.0 mm (without bottom leveler)
Material:
All the carcass panels for the COD unit are made of 18 mm Thick Prelaminated Particle Board, with all the edges edge banded with 0.8 mm thick PVC lipping. Back panel and Drawer bottom panels are made of 9 mm Thick Prelaminated Particle Board and are fixed in the grooves.
Drawer fronts are made of 18 mm thick PVC Foiled MDF
High quality hardware like Cam fasteners, Drawer Ball slides, knobs, Metal Inserts, levelers. wall fixing brackets, screws & dowels are used.
The unit is provided with the provision for fixing with the wall, to avoid the toppling of the unit.
Construction: Knock Down construction.
Packets: 1 Chest of Drawer in 2 packets.
Important note: It is mandatory to anchor the unit to the wall with the special hardware provided to avoid accidental toppling of the unit.
Study Table
Overall Size:
Length(L) — 756.0 mm
Width (W) — 900.0 mm
Height (H) — 817.0 mm (without bottom leveler)
Material:
All the carcass panels for the study table unit are made of 18 mm Thick Prelaminated Particle Board, with all the edges edge banded with 0.8 mm thick PVC lipping.
Worktop panel is made of 18mm thick PVC Foiled MDF
High quality hardware like Cam fasteners, Table bracket, table bracket damper, Drawer Roller slides, knobs, Metal inserts, levelers, Cable manager, barrel nut, screws & dowels are used.
Construction: Knock Down construction.
Packets: 1 Study Table in 1 packet.
Wardrobe 2400 mm
Overall Size:
Length(L) — 600.0 mm
Width (W) — 2140.0 mm
Height (H) — 2400.0 mm (without bottom leveler) (height can be increased upto 35mm, which is required for the levelling of the unit)
Material:
All the carcass panels for the Wardrobe unit are made of 18 mm Thick Prelaminated Particle Board, with all the edges edge banded with 0.8 mm thick PVC lipping. Back panel of the carcass and Drawer bottom panels are made of 9 mm Thick Prelaminated Particle Board and are fixed in the grooves.
Doors are made of 18 mm thick PVC Foiled MDF. Doors are provided with Sliding fitting with soft-close on both the sides (Experience while closing and opening of the door), Doors are also provided with the Door bend adjustment fitting to adjust the warpage of the door.
High quality hardware like Cam fasteners, Heavy duty cam fasteners, Wardrobe levelers, Drawer Roller slides, Handles, Locks for Main door and internal drawer and doors, Hanging rods, Metal inserts, screws & dowels are used.
Construction: Knock Down construction.
Packets: 1 Wardrobe base in 5 packets + 1 packet for the door (Total 6 packets).
Note: About 6’’ of space is required above the wardrobe for the proper assembly of the unit.
Wardrobe 1970 mm
Overall Size:
Length(L) — 600.0 mm
Width (W) — 2140.0 mm
Height (H) — 1970.0 mm (without bottom leveler) (height can be increased upto 35mm, which is required for the levelling of the unit)
Material:
All the carcass panels for the Wardrobe unit are made of 18 mm Thick Prelaminated Particle Board, with all the edges edge banded with 0.8 mm thick PVC lipping. Back panel of the carcass and Drawer bottom panels are made of 9 mm Thick Prelaminated Particle Board and are fixed in the grooves.
Doors are made of 18 mm thick PVC Foiled MDF. Doors are provided with Sliding fitting with soft-close on both the sides (Experience while closing and opening of the door)
High quality hardware like Cam fasteners, Heavy duty cam fasteners, Wardrobe levelers, Drawer Roller slides, Handles, Locks for Main door and internal drawer and doors, Hanging rods, Metal inserts, screws & dowels are used.
Construction: Knock Down construction.
Packets: 1 Wardrobe table in 4 packets + 1 packet for the door (Total 5 packets).
Note: About 6’’ of space is required above the wardrobe for the proper assembly of the unit.